LW-7130 Power up Back side Packaged Packaged




Withstand voltage tester is the effective and direct way to test insulation strength for electric equipments. It check dangerous flaws and make sure electric equipment continuous working. It typically used to test insulation strength for all kinds of electrical equipments, components like capacitors, insulation materials.



*Small size ,light weight

*Easy operation, botton lock

*Provide 10 groups memory setting, each group could choose four kinds working mode,3 steps

*128×64 dot matrix LCD display, test mode is clear at glance

*Rising voltage gradient according to time, real-time analysis, looking for breakdown point

*Safe electrical function

*Lower limit on current Settings, intelligent alarm

*Arc detection function(1-9grades)

*Provide remote PLC control interface and could choose RS232/GPIB communication port



Specification Range Analysis of degree Basic accuracy
Voltage endurance
Output voltage AC 0-5(KV)/20(mA) 0.01 ±(2% of setting+5V)
DC 0-6(KV)/7.5(mA)(mode LW-7130)
Output frequency/waveform 50 or 60Hz, ±100ppm,sine wave, the distortion degree<2%
The current upper limits setting AC 0.1-12.009(mA) 0.01 ±(2% of setting+2counts)
DC 0-7500(Aµ)(only LW-7130) 1
The current lowerlimits setting AC 0.1-9.999(mA) 0.01 ±(2% of setting+2counts)
DC 0-999.9(Aµ)(only LW-7130) 1
Rising time, second          0.1-999.9(s) 0.1 ±(0.1% +0.05counts)
Down time, second AC:0-999.9(S),DC:1-999.9(S) 0.1 ±(0.1% +0.05counts)
Test time, second 0,0.3-999.9(s)(0=continously) 0.1 ±(0.1% +0.05counts)
Arc detection 9grades(zero is off, one is the most sensitive)
Insulation resistance(IR): this function just for model LW-7142
Output voltage 0.1-1(KVdc) 0.01 ±(2% of setting+5V)
Insulation resistance limit 0-9999(MΩ)( zero is off) 1 ±(2% of setting+2C.)≥500vdc
Insulation resistance lower limit 1-2000(MΩ) 1 ±(5% of setting+2C.) <500vdc
Test time, second 0,0.5-999.9(s)(0=continously) 0.1 ±(0.1% +0.05counts)
Other specification
Memory groups 10groups memory,4kinds testing mode:W,I,W-I,I-W, each group could continuously testing 3 steps
Peripheral remote control, PLC interface Provide Pass, Fail, Processing Remote monitoring signals, Test , Stop contact
Security protection Overload or short circuit automatically cut off the output, light and buzzer alarm
Display 128×64 dot matrix LCD display
Dimension (mm)/Weight (kg) 280*89*370/10